Kegerators for Home Brew

Our kegerators come fully equipped for the purpose of home brew. The only additional purchases you would need to make is a 19L ball lock keg. These top of the line kegs come with a 10 year warranty and are made to be compatible to our kegerators, meaning that no additional coupler purchases are required for the purpose of home brew. This also means that you are able to fit 4 of the 19L ball lock kegs in any Series X Kegerator fridges.

Kegerators for commercial keg use:

The Series X kegerators can be used for commercial keg consumption. The Single Tap Kegerator includes one tap and coupler, but you are required to choose which one - either an A, D or S- type kegerator coupler at Checkout. The Series X kegerators with Double Tap and coupler, already includes an A-Type and D-Type coupler. There is no additional charge if you would prefer an S-Type swapped in, please just make a note of this in the checkout notes. The Series X kegerators can hold one 50L commercial keg or three 20L commercial kegs at once.

Coupler Information:

Couplers are required for commercial keg use. Below is a list of the beer brands that are compatible to each coupler. You will need to purchase 1 coupler per tap in use. 
A type Coupler:
5 Seeds
Balmain Brewing
Bridge Road
Brookvale
Bundaberg & Cola
Canadian Club
Carlsberg
Coopers
Franzikaner
Furphy
Guinness
Hahn
Heineken
Hills Cider
James Boags
James Squire
Kilkenny
Kirin
Kosciuszko
Kronenbourg
Little Creatures
Lowenbrau
Paulaner
Pipsqueak
Sapporo
Spaten
Toohey's
Two Birds
White Rabbit
XXXX Gold
Young Henrys
D type coupler:

4 Pines
Bulmers
Carlton Draught
Cascade
Cricketers Arms
Crown Lager
Fat Yak
Great Northern
Kingfisher
Konig
Monteith's
Mountain Goat
Peroni
Pure Blonde
Resch's Draught
Somersby
Tiger Beer
VB

S type coupler:
Asahi
Heineken
Hofbrau
Cantillon
Leffe
Pilsner Urquell
Stellar Artois
Strongbow Cider
The big brands are split mostly between the A and D type couplers. You can operate up to three 20L commercial kegs at once in our series X triple tap kegerators, therefore it may be best to purchase 1 of each coupler so you don't miss out on any of the above beer brands. Alternatively if you're set on your favourite beer brand it would be in your best interest to purchase the same coupler for all of the taps. These couplers are easy to attach and detach, you would just have to make sure that the appropriate beer brand is attached to the appropriate coupler
Commonly Asked Questions:

1. What's the difference between the Series 4 and Series X kegerator?
The Series X is a much more modern model of the Series 4. The Series X has 15% faster cooling whilst being 10% more energy efficient. It can also fit four 19L ball lock kegs for home brew in comparison to three from the Series 4 and three 20L commercial kegs as opposed to two.
2. Are there any purchases you'd recommend to help manage the upkeep of the kegerator?
Our stellar clean beer line cleaner and Keg cleaning powder, comes standard in our kegerator kits. If you need more, go to our Beer Supply | Accessories section. It removes protein soil and staining, baked on carbon, and fatty acids.
3. Do the kegerators come with a gas cylinder and how long do they last?
The Single Tap Kegerator purchase comes with a full 2.6kg C02 gas cylinder and the Double Tap Kegerator purchase comes with a full 2.66kg CO2 gas cylinder. The 2.6kg gas cylinder lasts for 6-8 x 50L commercial kegs depending on spillage.
4.How long does it take for the kegs to cool?
It is quite hard to say as it depends on how they've previously been stored but kegs at room temperature take approximately 6 hours to cool.
5. How long can kegs be stored in the fridge?
Rule of thumb is 6 weeks. After 6 weeks flavours start to fade, oxidization occurs, and the protein structure that gives the beer body starts to break down.